Products
$ 136.00
Coolant filters are not a new idea to the diesel engine world. They come in most OEM applications for medium duty and OTR tractor trailer rigs. The idea was somehow tossed aside for light duty applications, most likely due to cost. For our light duty trucks it is a very important issue...
$ 160.00
One HUGE benefit of the installation of the 6.0L coolant filter is the protection of the Oil Cooler and consequently, the EGR cooler. The coolant passes through the oil cooler before it heads towards the EGR cooler. The oil cooler becomes clogged with debris in the cooling system. The EGR cooler passes...
$ 164.00
PLEASE NOTE: Shut off Valves are included in this system. Coolant filters are not a new idea to the diesel engine world. They come in most OEM applications for medium duty and OTR tractor trailer rigs. The idea was somehow tossed aside for light duty applications, most likely due to...
$ 190.00
The cooling system on the Ford 2011-Current 6.7L trucks is more complex than in previous years. There are actually two coolant circuits. One circuit cools the auxiliary coolers (low temp system), and one cools the engine and oil cooler (high temp system). The latter is the one we are concerned...
$ 160.00
Coolant filters are not a new idea to the diesel engine world. They come in most OEM applications for medium duty and OTR tractor trailer rigs. The idea was somehow tossed aside for light duty applications, most likely due to cost. For our light duty trucks it is a very important issue...
$ 36.00
THIS THERMOSTAT WILL FIT 1996-2003 Ford 7.3L trucks starting with Engine Serial #201681. Not for use with 1994-1995 trucks unless you have installed a 1996-2003 water pump.
This item is currently out of stock.
The kit includes the two boots that connect the intercooler pipes to the intake manifold, and the two boots that seal the intake manifold to the heads. It includes four T-bolt spring clamps for the upper boots and four heavy duty stainless steel clamps for the lower boots. The spring...
This item is currently out of stock.
This kit includes the two boots that connect the intake manifold piping ("Spider") to the intake plenums on 1999.5-2003 7.3L PSD trucks. Also included are four worm gear drive clamps. THESE BOOTS ARE NOT FOR USE ON THE INTERCOOLER PIPING! Stock boot material is silicone. However, this type of material...
This item is currently out of stock.
The kit includes the two boots that connect the intake manifold to the cylinder heads on the Early 1999 Powerstroke. It includes four worm drive clamps for the boots. The spring bolt clamps are not to be used in this application as they will damage the intakes. If you are confused about how many boots...
$ 34.00
Repair those bent or crushed intake plenums instead of replacing them. These inserts make for a better boot seal as well as adding significant strength. Simply push in the inserts and reinstall boots.
This item is currently out of stock.
The kit includes the two boots that connect the intercooler piping to the intercooler on both sides of the radiator. It includes four T-bolt spring clamps. The spring bolt clamps are 300 series stainless steel with zinc coated bolts with a 300lb clamping strength. Recommended torque is 60 in/lbs. If...
This item is currently out of stock.
The kit includes the two boots that connect the intake manifold to the cylinder heads on the OBS 1994-1997 Powerstroke. It includes four worm drive clamps for the boots. The spring bolt clamps are not to be used in this application as they will damage the intakes. This boot kit is designed to replace leaking,...
Excl. postage